Tuesday 2 May 2017

Q:- For pipe ends of the same nominal wall thickness, the alignment offset requirement is:

1. Not more than 1/4 inch
2. Not more than 1/8 inch 
3. Not more than 1/32 inch 
4. If misalignment is larger than 1/16 inch due to dimensional variations, it shall be equally 
distributed around the circumference of the pipe.
5. None of the above

Monday 17 April 2017

#AWS Certified Welding Inspector Training Course

 
#AWS Certified Welding Inspector Training Course

AWS CWI Certified Welding Inspector Training, Course, Test, Exam, Seminar, Certification in Mumbai

Are you looking for AWS Certified Welding Inspector CWI Training Center in Mumbai? if you are, then you’re at the right place, On this Blog  we are not just going to pitch you to attend our AWS CWI Seminar, Our AWS CWI training instructors also going to provide you lots of valuable information on what, why and how to do AWS Certified Welding Inspector CWI Exam.
Eurotech offer 7 days of intensive AWS Certified Welding Inspector Training Course that will help prepare you to pass the AWS CWI Certification Exam. Eurotech experienced instructors will help you learn the material you need to know fast, and show you how to use and understand the latest welding standards.

We have Four Location for AWS Certified Welding Inspector Course:

  1. Mumbai
  2. Chennai
  3. Ahmedabad
  4. New Delhi

You can Check here Next AWS CWI Training Schedule 2017

Who Should Attend CWI Certified Welding Inspector Course?

All personnel whose responsibilities are in making decision, exercising of judgment concerning welding operations in the following industries. Like Oil and Gas, Manufacturing, Petrochemical, Power Generation and Power Stations, Ship Building/Ship Repair and Construction, Offshore Fabrication, Railways, Service and Maintenance and Metal Fabrication.

Eligibility CWI Certified Welding Inspector Exam/Seminar:

Minimum of 5 year industry experience or Minimum of 3 year industry experience with degree/diploma holders in engineering, technology, engineering physics or physical science
  • Associate or higher degree in engineering technology, engineering, or a physical science 3 years
  • High school diploma plus two or more years engineering/technical school courses 3 years
  • High school diploma plus one year engineering/technical school courses or one or more years of vocational education and training in a welding curriculum 4 years
  • High school diploma or approved high school equivalency diploma 5 years
  • At least 8th grade 9 years
  • Less than 8th grade 12 years

Course Type:

6 Day Authorized Seminar

Benefits of Certified Welding Inspector Course :

- Official Course for AWS CWI Certification
- 6 Days Intensive Training
- Includes Basic NDT Techniques and Welding Techniques
- Results in Deeper Understanding of Welding Quality

Certified Welding Inspector Exam Pattern:

Part A – Fundamentals 150 2 hours 72% Close Book
Part B – Practical 46 2 hours 72% Close Book
Part C – Code Book 60 2 hours 72% Open Book

Certified Welding Inspector Course Description:

Welding Inspection Technology Workshop - 3 DAYS

Helps prepare you for the CWI/CWE Exam (Part A) The Welding Inspection Technology Workshop is packed with information on nondestructive examination methods applicable to common welding processes. It will assist welding inspectors and welding educators with knowledge of welding and inspection fundamentals useful on the jobsite. In addition, this seminar will prepare examination candidates for Part A (Fundamentals) of the CWI examination.

Visual Inspection Workshop ( 1.5 Day)

Helps prepare you for the CWI/CWE Exam (Part B) This workshop provides hands-on training in the use of weld measurement tools and plastic weld replicas to determine the sizes of various weld discontinuities. Students will compare what they find to the criteria in a sample codebook to determine the acceptability or rejection criteria of the sample weldments. The workshop also includes a sample practical examination to prepare test candidates for Part B (Practical Applications) of the CWI examination. By attending this workshop, you can learn: Use of inspection tools. How to ensure compliance with the applicable code. Dos and don’ts of documentation. When a discontinuity is acceptable. When a discontinuity can be rejected. Why visual inspection can be the most effective NDE technique.

API 1104 Code Clinic ( 1.5 DAY)

Helps prepare you for the CWI Exam (Part C) if you are testing to API 1104 This four-hour course covers general provisions of API 1104, including qualification of welding procedures for welds containing filler-metal additions, design and preparation of the joint for production welding, nondestructive testing and acceptance standards, and automatic welding with and without filler-metal additions. Candidates will be given the Course material for training before the workshop and are supposed to come with a thorough reading in the class.

People also ask:

  1. How to Take free AWS CWI Exam?
  2. How to Renewal your AWS CWI Certificate?
  3. What Books do I Need for CWI Exam?
  4. How do you become a Certified welding inspector?

 

Please Contact To Puneet Sharma via phone: +91-8196980555 or by email at aws.cwi.training@gmail.com to reserve your place early and to be issued a CWI application.

If you have any questions, please feel free to ask!

If you want to Attend AWS CWI Seminar, Please fill out the Enquiry Form to Get More Details:

Sunday 2 April 2017

Q:- For welder qualification, the specimens shall be prepared for tensile-strength, nick-break, and bend tests. When tensile-strength tests are omitted:

1. The welder is not qualified 
2. The weld must be redone 
3. The is not covered in API 1104 
4. Tensile-Strength specimens shall be subject to the nick-break test 
5. Extra face bends must be tested

Monday 27 March 2017

Interview Questions Answers Related To Valves: -

Questions related to valves: -

  1. What is the function of valves?

Answer: -
  1. Isolation.
  2. Regulation.
  3. Non-Return.
  4. Special purpose.
  1. How the valves are classified based on their function?

Answer:-

A. Isolation.

  1. Gate valve.
  2. Ball valve
  3. Plug valve.
  4. Piston valve.
  5. Diaphragm Valve.
  6. Butterfly valve.
  7. Pinch valve.

B. Regulation

  1. Globe valve.
  2. Needle valve.
  3. Butterfly valve.
  4. Diaphragm valve.
  5. Piston valve.
  6. Pinch valve.

C. Non- Return

  1. Check valve.

D. Special purpose

  1. Multi- Port valve.
  2. Flush Bottom valve.
  3. Float valve.
  4. Foot valve.
  5. Line blind valve.
  6. Knife Gate valve.

  1. How the valves are classified based on its method of operation?

Answer: -

Valves are classified based on its method of operation as: -

  1. Self- operated valves.
  2. Operated valves.

  1. Name the Self – operated & operated valves?

Answer:-

Mainly the check valves are self-operated and all other valve types comes under operated valves.

  1. How the valves are classified based on end connection?

Answer: -

Valves are classified based on end connection as: -
  1. Screwed ends.
  2. Socket ends.
  3. Flanged ends.
  4. Butt weld ends.
  5. Wafer type ends.
  6. Buttress ends.
End connection means arrangement of attachment of the valve with the equipment or the piping.

  1. What are the types of check valves?

Answer: -

Check valves are divided into two types based on check mechanism as: -
  1. Lift check valve.
  2. Swing check valve.

  1. What do you mean by special purpose valves?

Answer:-

Valves that perform duties other than the two-way isolation, control and check are called special Purpose valves.

  1. What are Glandless piston valves? Where these are used?

Answer:-

Glandless piston valves are regulating valves used in steam services.

Friday 24 March 2017

What Books Recommended to Study for CWI Test?

What Books Do I Need to Study for CWI Test? 

I would suggest the "Welding Inspector's Handbook" available from American Welding Society AWS. If you take the American Welding Society Certified Welding Inspector Training seminar, you will be given a stack of books to study.

If you don't take the CWI Training seminar, Buy the following books:

  • Welding Inspection Technology and Workbook
  • AWS A2.4 Welding and NDT Symbols
  • AWS A3.0 Terms and Definitions
To pass the CWI Exam, you will need to get 72% marks from Each Part.
Go to the AWS American Welding Society website, they have downloadable versions of Part B, and other aids.  Click Here to Downloads Free AWS CWI Books from American Welding Society online bookstore
There is lots of welding symbols questions, maybe 16. So know those cold. Lots of questions on welding processed, too.
You will have to know how to use a micrometer and dial caliper
Calculate cross sectional area of a round and rectangular piece.
Calculate ultimate tensile strength, elongation, and reduction in area using both US customary units as well as metric conversions.
The hard part will be to identify various weld discontinuities using plastic weld replicas and measure weld sizes, undercut, etc.
You will be provided with a "welding standard" that is a compilation of AWS D1.1, ASME Section IX, and a little API thrown in for good measure. The trick is to read the specification without allowing your day to day experience influence your decision on accepting or rejecting welds.  Use only the criteria listed in the specification.
I understand it used to be harder, with much more math. The one week immediately preceding the tests is invaluable. They really drum it into your head.
The AWS CWI Training Seminar is definitely worth it. And then the one week class AWS CWI gives right before the test is excellent.
There are three parts of tests involved, and they have to be completed in 2 hours each part. The first part is (Part A) General Knowledge and is 150 questions closed book.
The second part is Part B, The Part B is practical test. Part B is the accumulate welding standard GTAW referral. This is where most candidates who miss the test mess up. Part of the reason is the samples are pretty beat up and may confuse candidates. With the good preparation it will go well. Another part is if you have so many years of experience in inspecting, it may well work against you. As GTAW mentions, accept or reject based on the supplied test only. Some of the porosity is unbelievably huge, but depending on the criteria is acceptable.
The third is Part C, The Part C is your Code section. I tested with API 1104 (Welding of Pipelines and Related Facilities) and it sounds like you will be also. Both Part B and Part C is open book, so memorization of formulae won't be an issue.

People also ask:

Good Luck !! Wish this blog post will be help. If you have any other questions, please feel free to contact us. 

Please Contact To Puneet Sharma via phone: +91-8196980555 or by email at aws.cwi.training@gmail.com to reserve your place early and to be issued a CWI application.

If you want to Attend AWS CWI Seminar, Please fill out the Enquiry Form and Get More Details:


Monday 20 March 2017

Q:- Solidification Cracking Occurs:

1. In the HAZ  
2. In the Parent Metal  
3. Use low Hydrogen Electrodes  
4. All of the Above 

Tuesday 14 March 2017

Q:- When welding on construction site which type of power source would be considered to be the most unsafe:

1. 110Volt main machine  
2. 440Volt main machine  
3. Diesel engine driven welding generator process  
4. All welding hav the same safety factors

Monday 6 March 2017

Q: - Would you consider using a 5mm electrode for vertical up root runs in a 6G (HL045) fixed position pipe?

1. Yes ,it is compatability  
2. Yes but this would depend upon the welder skill  
3. No,it is not the most suitable electrode coating type  
4. No, the electrode should have been smaller in diameter  

Monday 27 February 2017

Q:- The similarities between BS EN22553 and AWS A2.4in deciding welding symbols are

1. Both have the same rule for depicting weld at round
2. Both have the same rule for depicting other side
3. Both have the same rule for depicting sequence of operations
4. Both have the same method for depicting welding process

Monday 20 February 2017

Q:- Why is it essential to clean the surrounding parent metal adjacent to the weld metal made by MMA(SMAW)which is to be ultrasonically tested?


  1. Sound waves will not travel though paint 
  2. Remove any rust 
  3. The spatter will impede the contact of the probe and the parent material surface 
  4. Spatter will reflect the back will echo signal and give spurious indications 

Sunday 12 February 2017

Q:- While inspecting a weld on a 100mm thick high carbon steel plate with tolerance of +5mm you find the weld is visual acceptable, however the parent material has several arc strikes present adjusted the weld approximately 3mm drop deep, what course of action would you take?

1. None I am only inspecting the weld
2. Recommended that the area be dressed smooth
3. Recommended that the area be dressed smooth followed by MPI
4. High carbon steel is net susceptible to cracking so I would weld over the arc strikes then blend them

Tuesday 13 December 2016

Q:- Hot pass Temperature?

  1. Equal to work peace temperature 
  2. More then work peace temperature 
  3. Less then work peace temperature

Tuesday 6 December 2016

AWS CWI Seminar and Exam


American Welding Society Certified Welding Inspector AWS CWI Course Chennai

This class is designed for inspectors and engineers working in petrochemical or fabrication facilities. The course prepares the student for the AWS-CWI (Certified Welding Inspector) exam.  This is an
Intensive one-week course with a heavy emphasis on the technical and inspection aspects of welding.  This course content includes:

We “EUROTECH” introduce ourselves as a multinational training & certification company.
Eurotech is an authorized agent for AWS American Welding Society for its certification program like AWS-CWI/SCWI/CAWI and more...
We conduct AWS Examination with documented training in Chennai India regularly.

Who Should Attend CWI Certified Welding Inspector Course?

All personnel whose responsibilities are in making decision, exercising of judgment concerning welding operations in the following industries. Like Oil and Gas, Manufacturing, Petrochemical, Power Generation and Power Stations, Ship Building/Ship Repair and Construction, Offshore Fabrication, Railways, Service and Maintenance and Metal Fabrication.

Eligibility CWI Certified Welding Inspector Exam/Seminar:

Minimum of 5 year industry experience or Minimum of 3 year industry experience with degree/diploma holders in engineering, technology, engineering physics or physical science
  • Associate or higher degree in engineering technology, engineering, or a physical science 3 years
  • High school diploma plus two or more years engineering/technical school courses 3 years
  • High school diploma plus one year engineering/technical school courses or one or more years of vocational education and training in a welding curriculum 4 years
  • High school diploma or approved high school equivalency diploma 5 years
  • At least 8th grade 9 years
  • Less than 8th grade 12 years

Course Type:

6 Day Authorized Seminar

CWI Course Benefits:

- Official Course for AWS CWI Certification
- 6 Days Intensive Training
- Includes Basic NDT Techniques and Welding Techniques
- Results in Deeper Understanding of Welding Quality

CWI Exam Pattern:

Part A – Fundamentals 150 2 hours 72% Close Book
Part B – Practical 46 2 hours 72% Close Book
Part C – Code Book 60 2 hours 72% Open Book

CWI Course Description:

Welding Inspection Technology Workshop - 3 DAYS

Helps prepare you for the CWI/CWE Exam (Part A) The Welding Inspection Technology Workshop is packed with information on nondestructive examination methods applicable to common welding processes. It will assist welding inspectors and welding educators with knowledge of welding and inspection fundamentals useful on the jobsite. In addition, this seminar will prepare examination candidates for Part A (Fundamentals) of the CWI examination.

Visual Inspection Workshop ( 1.5 Day)

Helps prepare you for the CWI/CWE Exam (Part B) This workshop provides hands-on training in the use of weld measurement tools and plastic weld replicas to determine the sizes of various weld discontinuities. Students will compare what they find to the criteria in a sample codebook to determine the acceptability or rejection criteria of the sample weldments. The workshop also includes a sample practical examination to prepare test candidates for Part B (Practical Applications) of the CWI examination. By attending this workshop, you can learn: Use of inspection tools. How to ensure compliance with the applicable code. Dos and don’ts of documentation. When a discontinuity is acceptable. When a discontinuity can be rejected. Why visual inspection can be the most effective NDE technique.

API 1104 Code Clinic ( 1.5 DAY)

Helps prepare you for the CWI Exam (Part C) if you are testing to API 1104 This four-hour course covers general provisions of API 1104, including qualification of welding procedures for welds containing filler-metal additions, design and preparation of the joint for production welding, nondestructive testing and acceptance standards, and automatic welding with and without filler-metal additions. Candidates will be given the Course material for training before the workshop and are supposed to come with a thorough reading in the class.

Click here to Check Our Next AWS CWI Seminar

Click Here to Take free AWS CWI Exam


How to Renewal your AWS CWI Certificate?

If you want to renew your CWI Certificate? Contact us for the renewals of your AWS-CWI, SCWI certifications well before 8-weeks of expiration.

Renewals process for CWI Certified Welding Inspector:

The renewal process is part of your continued certification according to QC1:2007.The validity of the certification is 3 years and Certified Welding Inspectors can renew their status by applying in the prescribed application format before the expiration date of the certification.
If the renewals are not applied before expiration, the candidates lose their CWI Certified Welding Inspector status and will have to reappear for fresh certification.

Please Contact To Puneet Sharma via phone: +91-8196980555 or by email at aws.cwi.training@gmail.com to reserve your place early and to be issued a CWI application.

If you have any questions, please feel free to ask!

If you want to Attend AWS CWI Seminar, Please fill out the Enquiry Form and Get More Details:

Full Name


E-mail:


Your Details:


 

Tuesday 29 November 2016

Questions related to Pipe Fittings: -

1. How can flanges be classified based on Pipe Attachment?

 Answer: -

Flanges can be classified based on pipe attachment as: -
Slip – on. : - The Slip-on type flanges are attached by welding inside as well as outside. These flanges are of forged construction.
Socket Weld. : - The Socket Weld flanges are welded on one side only. These are used for small bore lines only.
Screwed. : - The Screwed-on flanges are used on pipelines where welding cannot be carried out.
Lap Joint. : - The Lap Joint flanges are used with stub ends. The stub ends are welded with pipes & flanges are kept loose over the same.
Welding Neck. : - The Welding neck flanges are attached by butt welding to the pipe. These are used mainly for critical services where the weld joints need radiographic inspection.
Blind. : - The Blind flanges are used to close the ends which need to be reopened.
Reducing. : - The reducing flanges are used to connect between larger and smaller sizes without using a reducer. In case of reducing flanges, the thickness of flange should be that of the higher diameter.
Integral. : - Integral flanges are those, which are cast along with the piping
component or equipment.

2. How can flanges be classified based on Pressure- temperature ratings?

Answer: -
Flanges are classified based on pressure temperature ratings as: -
#A. 150
#B. 300
#C. 400
#D. 600
#E. 900
#F. 1500
#G. 2500
Pressure temperature rating carts in the standard ASME16.5 specify the non-shock working
gauge pressure to which the flange can be subjected to at a particular temperature.

3. How can flanges be classified based on facing?

Answer: -
Flanges are classified based on facing as: -
  1. Flat face. (FF)
  2. Raised face. (R/F)
  3. Tongue and groove. (T/G)
  4. Male and female. (M/F)
  5. Ring type joint. (RTJ)

4. How can flanges be classified based on face finish?

Answer: -
Flanges are classified based on face finish as: -
  1. Smooth finish.
  2. Serrated finish.

5. Where the smooth finish flange & serrated finish flange finds its use?

Answer: -
The smooth finish flange is provided when metallic gasket is provided and serrated finish flange is provided when non-metallic gasket is provided.

6. What are the types of serrated finish provided on flange face?

Answer: -
  1. Concentric or
  2. Spiral (Phonographic)

7. How the serration on flanges is specified?

Answer:
The serration on flanges is specified by the number, which is the Arithmetic Average Rough
Height (AARH).

8. Where the concentric serration is insisted for face finish?

Answer: -
Concentric serration are insisted for face finish where the fluid being carried has very low
density and can find leakage path through cavity.

9. How the Gaskets are classified based on the type of construction?

Answer: -
Based on the type of construction, gaskets are classified as: -
  1. Full face.
  2. Spiral wound metallic.
  3. Ring type.
  4. Metal jacketed.
  5. Inside bolt circle.

10. What is the most commonly used material for Gasket?

Answer: -
Compressed Asbestos Fibre.

11. Which type of gasket is recommended for high temperature & high-pressure application?

Answer: -
Spiral Wound Metallic Gasket.

11. What are the criteria for selection of MOC of Spiral Wound metallic Gasket winding material?

Answer: -
The selection of material of construction for Gasket winding depends upon: -
  1. The corrosive nature and concentration of fluid being carried.
  2. The operating temperature of the fluid.
  3. The relative cost of alternate winding material.

12. What are the most common materials used for spiral wound metallic gasket winding?

Answer: -
The most commonly used material for spiral wound metallic gasket winding is: -
  1. Austenitic stainless steel 304 with asbestos filler.
  2. Austenitic stainless steel 316 with asbestos filler.
  3. Austenitic stainless steel 321 with asbestos filler.

13. Which material is used as filler material for spiral wound gasket in case of high temperature services?

Answer: -
For very high temperature services, graphite filler is used.

14. What is centering ring in connection to spiral wound gasket?

Answer: -
Spiral wound gaskets are provided with carbon steel external ring called centering ring.

15. What will be the AARH finish on flange face for using spiral wound gasket?

Answer: -
125-250 AARH finish.

16. On which type of flanges the use of spiral wound gasket are restricted?

Answer: -
rating spiral wound gasket on flanges other#ASME B16.5 does not recommend the use of 150 than welding neck and lapped joint type.

17. Up to what temperature limits the low strength carbon steel bolts should not be used for flanged joints?

Answer: -
C.°C or below - 28°Flanged joints using low strength carbon steel shall not be used above 200

17. How the pipe fittings are classified based on end connections?

Answer: -
Pipe fittings are classified based on end connection as: -
  1. Socket weld fittings.
  2. Screwed end fittings.
  3. Beveled end or Butt weld fittings.
  4. Spigot socket fittings.
  5. Buttress end fittings.

18. Up to what temperature the carbon steel materials shall be used?

Answer: -
Carbon steel materials shall be used for temperature up to 425C°

19. Which material is used for temperature above 426C°?

Answer: -
Alloy steel materials shall be used for temperature above 426 C°

20. Which type of material is used for corrosive fluid?

Answer: -
Stainless steel materials shall be used for corrosive fluid.

21. Which type of piping materials are used for drinking water, instrument air etc?

Answer: -
Galvanized steel materials shall be used for drinking water, instrument air and NI lines (LP).

22. What is the difference between Pipe and Tube?

Answer: -
Pipe is identified by NB and thickness is defined by Schedule whereas Tube is identified by OD & its thickness as BWG (Brimingham wire gauge or 1/100 inch).

23. From which size onwards NB of pipe is equal to OD of Pipe?

Answer: -
From the size 14” and onwards NB = OD of pipe.

24. What should be the radius of long radius elbow?

Answer:
1.5D (Where “D” is the diameter of the pipe.)

25. What should be the radius of short radius elbow?

Answer:-
1D(Where “D” is the diameter of the pipe.)

26. What is the basis of using of short radius & long radius elbow?

Answer:-
Long radius elbow are used for small pressure drop whereas short radius elbow are used for high pressure drops. For catalyst flows vary long radius elbows are used.

27. Normally where do we use the following?

(1) Eccentric reducers.   (2) Concentric reducers.

Answer:
  1. Eccentric reducers = Pump suction to avoid Cavitation, To maintain elevation (BOP) in rack.
  2. Concentric reducers = Pump discharge, vertical pipeline etc.

28. Concentric reducer is used in pump suction. (Yes / No). Explain.

Answer:
No. Air pockets may form if concentric reducer is used at pump suction, which results in cavitation
and cause damage to Pump. To avoid this problem, Eccentric Reducer with flat side up (FSU) is
used in Pump Suction.

29. Where the ERW spiral & longitudinal pipes are used?

Answer: -
Use depends upon the availability of pipes. Nothing functional difference.

30. Where the ERW & Seamless pipes are used?

Answer: -
Above 18” ERW pipes are used. Below 18” seamless pipes are used. Seamless pipes can sustain
higher temperature & pressure.

31. What is the main use of ASTM A53 & A106 Gr.B pipes?

Answer: -
ASTM A53 pipes are mainly used for utility services whereas A106 Gr. B pipes are used for high
Pressure & high temperature services.

32. From which side of pipe will you take a branch connection?

Answer:- 
When fluid is Gas, Air or Steam and Cryogenic Service – Topside.
When Fluid is Liquid – Bottom Side.

33. Why don’t we take a branch for Cryogenic Service from bottom side though the fluid is in liquid state?

Answer: -
There is the chance of ice formation during normal operation and since ice flows from the bottom of the pipe it will block the branch pipe connection.

33. Why do we provide High Point Vent (HPV) and Low Point Drain (LPD) in piping?

Answer:
HPV – For removing Air during Hydro-test.
LPD – For draining water after conducting Hydro-test.

34. What do you mean by Jacketed Piping?

Answer: -
Piping which is recognized as providing the most uniform application of heat to the process, as well
as maintaining the most uniform processing temperatures where steam tracing is not capable of
maintaining the temperature of fluid constant. Usually used for molten sulphur, Polymers service.

35. What is the minimum distance to be maintained between two welds in a pipe?

Answer: -
The thumb rule is that the minimum distance between adjacent butt welds is 1D. If not, it is never
closer than 1-1/2". This is supposedly to prevent the overlap of HAZs. Minimum spacing of
circumferential welds between centerlines shall not be less than 4 times the pipe wall thickness or
25 mm whichever is greater.

36. What do you mean by IBR and which lines comes under IBR purview?

Answer: -
IBR: Indian Boiler Regulation Act.
Steam lines with conditions listed bellow comes under IBR purview : –
  • Lines for which design pressure is 3.5 kg/sq. cm and above.
  • Line size above 10” having design pressure 1.0 kg/sq. cm and above.
  • Boiler feed water lines to steam generator, condensate lines to steam generator and flash drum.

37. What are Weldolet and Sockolet? And where they are used?

Answer:-
Weldolet and Sockolet are basically self-reinforced fittings.
Weldolet is used for Butt weld branch connection where standard tee is not available due to size
restrictions and the piping is of critical / high-pressure service. Sockolet is used for socket welding
branch connection, which require reinforcing pad.

38. What is the MOC for Superheated high pressure Steam Lines?

Answer:- 
A 335 Gr. P I / P 11, Composition: Cr. – ½ Mo (P1) / 1¼ Cr. – ½ Mo (P11)

39. What is the normal upstream and downstream straight length of orifice flow meter?

Answer: -
Upstream - 15D Downstream - 5D